Sinjoe 150-200W co2 laser power supply with integrated regulator which could
help the PSU support a input voltage ranges from AC 90 to 240V.
Need not to worry about different voltage damaging power supply.
What's more,top selling model ensure the stability and almost 0 maintenance Rate.
If you can afford that price,this is the best choice for high power laser.
What you will get
1pcs × Sinjoe Laser Co2 Laser Power Supply W150 for 150-200W Laser Tube
Input Voltage: AC 90-240V
AC Frequency: 47-440 Hz
Cold Surge Current: ≤60A(AC220V Input)/≤30A(AC110 Input)
Current Leakage: ≤0.7mA（AC220V Input)/≤0.4mA(AC110V Input)
Maximum Input Voltage: DC 50KV
Maximum Output Current: DC 38MA
Efficiency: ≥90﹪（full load）
Response Speed: ≤1MA
Control Interface: TTL level switch control; high or low effective level can be chosen
Pressure-proof: Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell
Protection: can work in open-circuit condition for a short time
Relative Humidity (RH)：≤90﹪
Cooling Way: Force-Air Cooling (FAC)
Net Weight(k.g): 6.4
Warranty: 12 Months
Shipment: By Air /Express/By Sea
- Good compatibility: It can be applicable to 150-200W laser tubes from different manufacturers.
- Cutting Type and Sculpting Type: The cutting type has a good power stability and strong adaptability; while the sculpting type has a quick response speed and good engraving effect.
- Dramatically lengthen the service life of laser.
- Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc.
- Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power.
- HY-T60 Power Supply has the function of open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit condition for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply.
- The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser.
- The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power.
- Application: Acrylic sculpture, cut; fabric sculpture, cut; rubber sheet sculpture, cut, etc.
Tags: w150 laser power,
150w laser power,
180w laser power,
co2 laser power 150w,
co2 laser power 180w,
regulator co2 laser power,
co2 laser power w150,
China laser power w150